Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108048033295 (international callers) or 08048033295 (Indian callers).
Wet Fume Scrubber is a device that can be used to control air pollution using a liquid. it brings the gas stream in contact with scrubbing liquid, as a result of which there is mass transfer of dust or dirt and other such elements into the liquid, thus resulting in a clean surface. They are most effective in removing toxic gases from the air and they can also be effective in eliminating particular matter.
Why Do You Need The Assistance Of A Wet Fume Scrubber?
In industrial setups demanding an efficient pollution control system for removing contaminants from the air, wet scrubber is the best solution. It is capable of removing both organic and inorganic pollutants from the air, thus making way for a normal environment otherwise, the harmful contaminants in air created by various industrial processes can cause illness, disrupt local ecosystem and also contribute to depleting the ozone layer.
Some of the many liquid solvents used by it include water, calcium hydroxide, sodium carbonate and sodium hydroxide. Some of the many industries that make use of a Vayuvents Private Limited wet fume scrubber include fertilizer plants, steel mills, acid plants, asphalt plants etc. Here is a look at why it is typically needed to clean:
• Inorganic gases, fumes and vapors
• Volatile Organic Compounds (VOC)
• Large Dirt Particles
This device is strong, durable and long-lasting. It can be used to do extensive cleaning work without issues of breakdown or failure It is capable of removing a variety of pollutants ranging from exhaust gas to dust particles. While water is the most common absorbing solution used in it, it is also possible to use sodium hydroxide, sodium carbonate and calcium hydroxide.
Its operations are very simple as it combines dirty gas stream with scrubbing liquid which helps to collect the scrubbing liquid. The dirt is captured in liquid droplets along with the liquid that’s dissolving them and is then treated after which the remaining is let out through the discharge outlet in mist form. In a wet fume scrubber system, there are many components such as scrubbing vessel, scrubbing fluid, pumping, ductwork, mist eliminator and exhaust stack. It is a device that is needed primarily for implementing a pollution free environment in industries and factories wherein machinery brings out dust particles into the air while it is functioning.
Wet Scrubbers are effective air pollution control devices for removing particles and/or gases from industrial exhaust streams. A Wet Scrubber operates by introducing the dirty gas stream with a scrubbing liquid – typically water. Particulate or gases are collected in the scrubbing liquid. Wet Scrubbers are generally the most appropriate air pollution control device for collecting both particulate and gas in a single system.
Pollution Systems offers a variety of Wet Scrubber systems specifically designed for your process application. Many important operating variables are considered when evaluating the size and type of scrubber for any specific application, and your deadline is always a factor in our responsiveness.
We offer high quality Industrial Fume Scrubbers for removal and washing of acidic fume laden air coming out of various industrial processes. The fume scrubbers we offer are used in industries that undertake chemical production, metal finishing, semiconductor manufacturing and other operations related to generating fumes and gases. The scrubbers are made of M.S. /S.S. /F.R.P., which provide them greater strength and durability. We offer fume scrubbers at the most competitive prices. Some of the most common applications of the same are: Pickling Chrome Plating Zinc Plating Molding The fume scrubbers are available in the following sizes and air volume: Sizes: 300 mm dia to 3000 mm dia Air Volume: 3000 m3/hr to 850,000 m3/hr We also offer wet collectors that are used for separation of particulate matter having moisture from dust laden air to remove aerosols & gaseous pollutants from an air stream & air purification along with dust collection.
Mancooler has longer life and durability to work in extreme Industrial Conditions.
In this type of Mancoolers, the impeller and Motor Assembly is mounted in the circular casing with suitable stand arrangement. This can be moved from place to place easily even in rough floor areas.
Products are combined with Quality & Performance to give trouble free operations for years to come.
Vayuvents Industrial Movable Drum Fans are packed with features to assist and help you get the job done comfortably.
Features such as an energy efficient induction motor, 2 speed switch, high velocity air flow, heavy duty constructed frames, drum & safety grills, 6 wide aluminium blades, tiltable drum & wheels to make it easy to manocuvre around the workplace.
With a good air velocity this unit is perfectly suited for ventilating small to medium areas indoors or outdoors. The tiltable drum body enables you to position the fan where needed and tilt the fan body allowing you to ventilate almost any area you need.
The heavy duty wheels mean you can roll or manoeuvre the fan from the workshop, shed, garage or work vehicle straight to where you need to ventilate, avoiding the need to carry a heavy fan leading to potential injury.
The fan comes fully assembled and ready to go straight from the box which means no down time having to assemble it once you get home or onto the job site. POWERVENT Industrial Movable Drum Fans fans are built tough and will last the distance when using them out in the field.
The overpowering heat in an industrial work place can bring down the efficiency and productivity of workers. The Vayuvents Pvt Ltd mancooler is an effective solution to this problem. A sturdy and powerful fan, it can cool the entire factory with its powerful air blast.
To suit the varying needs and requirements of different work places, the The Vayuvents Pvt Ltd Mancooler now comes to you in a range of three models.
SPECIAL FEATURES
The Vayuvents Pvt Ltd Mancooler discharge powerful air streams providing effective velocities over a longer distance.
Direction of air discharge can be adjusted over a wide angular range and can be instantly locked in position.
The Tubular Type Mancoolers have a swing of 180° and vertical tilting angle of 15°.
The die cast aluminium Impeller is aerodynamically designed to provide maximum air delivery.
Totally enclosed squirrel cage induction motor with Class B insulation.
Strong wire guard for safety.
APPLICATION AREAS
Industrial cooling of various machines and generators.
Factory shop floors, particularly those with heat generating machinery as in steel plants.
Spot cooling of boiler shops, smelting areas of foundries and casting shops.
Cold storages where edible commodities and perishables are dried.
Rubber processing plants for rubber drying.
TUBULAR TYPE
The Tubular Type Mancooler is mounted on a cradle with casing. Fitted with aerofoil blades of cast aluminium alloy, it is designed for high efficiency and long distance air throw. A simple mechanism allows you to adjust the air stream angle as required.
The cyclone dust collector is the basic & most conventional mechanical way to separate the heavy dust particles from the air stream using centrifugal cyclonic/vortex effect due to tangential rotation.
This can be used where the particle size of the dust is heavy, as a primary separator to reduce the dust load on the fabric filter or dust collector & as a spark trapper in some applications.
Vayuvents PVT.LTD. company has developed a series of cyclone dust collectors where you can get maximum efficiency of dust separation with lower power consumption. This has resulted in better outlet emission, lesser load on bag filter or dust collection system, improved life of filter bags, and better recovery of product.
Vayuvents Private Limited is India’s leading Industrial Mild Steel Cyclone Dust Collector exporters.
Buy best price high-quality and superior performance and high-quality Mild Steel Cyclone Dust Collector, Industrial Cyclone Dust Collector, Dust Separators, Pulse Jet Dust Collector Systems, Cyclone Dust Collectors System, Multi Cyclone Dust Collectors, Cyclone Separator – Dust Collector from Vayuvents Private Limited one of the largest manufacturer, exporter and supplier of Mild Steel Cyclone Dust Collector in Mumbai, India.
Advantages / Features of Mild Steel Cyclone Dust Collector
Capacity to handle high-volume dust loads.
Consist of high-quality dust bags for filtration.
Compact design for simple and non-complicated processes.
Provides higher Efficiency for solving dust-emitting issues in an effective way.
Aerodynamic design of the impeller and silencer reduces the sound and vibrations of the system.
Applications of Mild Steel Cyclone Dust Collector
Vayuvents Private Limited ’ Mild Steel Cyclone Dust Collector is extensively used to separate large-density particles from industrial process exhausts with centrifugal force. Mild Steel cyclone dust collectors are primarily used as pre collectors /pre-cleaners in multi-stage industrial applications. Mild steel cyclone dust collector finds applications in several industrial applications, including cement plants, pulp, and paper plants, steel mills, petroleum coke plants, metallurgical plants and sawmills etc.
Chat with us
Chat with us
